Nixie Tube Clock MKI - Purpleheart & Mixed Hardware
TGT Studios Nixie Clock Series blends old-world technology with modern components and wraps it in a retro-futurist package. Each piece is unique.
WHAT IS THE CLOCK MADE FROM?
I select all my wood personally, from rough stock, and process it no differently than I would material for a piece of fine furniture. All of my woods are chosen specifically for quality, figuring (where possible), and appropriateness of grain.
HOW DOES THE CLOCK WORK?
A nixie tube is a cold-cathode low-pressure vacuum tube that lights a series of digit filaments surrounded by neon gas. A small electrical current is then passed through the tube, lighting the digit filament. Despite this constant electrical feed, since the tubes are classified as cold-cathode and therefore run at a very low temperature, there is essentially no risk of overheating.
Nixie tubes utilize stacked filament numerals that create a very real sense of depth as the numbers change. Each number is its own filament and as a result the numbers jump forward and backwards within the tube. The tubes are controlled by a custom circuit board contained within a plexiglass housing. The clock is controlled by four designated buttons on the rear of the unit, the knobs at the front do not perform a function.
But most importantly, the IN-12 Tubes and circuit board are not dependant on AC current and can be run in any country.
TGT STUDIOS NIXIE TUBE CLOCK FEATURES
The clock can be easily programmed for time.
The clock also features a night mode (can be dimmed during nighttime hours).
The clock has a programmable alarm (beep only) and snooze function.
The clock has 3 separate RGB LED's installed, and they are fully configurable. This provides for over 700 different variants of backlight colour, which can be programmed for every hour. Choices!
GPS auto-set is available with an external module, but is not necessary for operation.
WHAT COMES IN THE CLOCK PACKAGE?
TGT Studios Nixie Tube Clock Package includes:
1 - handmade clock
1 - AC adaptor for your specific country (CAN/US, EU, UK or AUS),
1 - Set of Print Instructions For Operation, one (1) GPS Module for auto-sync.
1 - GPS Module for auto-sync.
1 - TGT Studios Brand Plate Signed by Artist & Kyle Miller (on clock)
1 - TGT Studios PRINT Package (a gift, features TGT Studios artwork)
This clock is made to order, please approximately 2-4 weeks for production unless otherwise stated in the listing.
All units are shipped via priority service and come with full insurance and tracking, worldwide. Worldwide shipping time approximately 5-7 business days.